Manage screens from your phone
Use the Screens section of Muin Go to see which TVs and tablets are online, scan a screen's QR code, pair a TV, replace a screen that lost its pairing, and send actions such as Identify or restart.
The Screens section of Muin Go holds your organization’s TVs and tablets. You can see which ones are online, open one to see what it is doing, pair a new TV and send it an action, all from your phone.
Screens is for owners and admins. Anyone else who opens it is asked to talk to an owner or admin.
When you’d use this
- You are standing in the hall and want to know which screen is offline.
- A new TV is on the wall and you want to pair it without a laptop.
- A TV lost its pairing and you want it back with the same name and board.
- Two boxes look the same and you need to know which one is which.
- You want a sticker on the back of each TV that opens its page.
The list
Open Screens in Muin Go. Each screen shows whether it is online, when it was last seen, its board, its app version and its location.
- Search by name, location or board.
- Offline only and Needs attention narrow the list.
- Screens are grouped by location.
- Pull down to refresh.
Scan a screen’s QR code
Tap Scan at the top of the list and point the camera at a Muin code. One button reads all of them:
| You scan | What opens |
|---|---|
| The Add this screen QR on a new TV | The pairing step for that TV |
| A tablet setup QR | A note to scan it with the tablet you are setting up |
| The manage QR on a screen’s staff panel | That screen’s page |
| A screen’s printed label | That screen’s page, even when the TV is off |
Tap the torch button in a dark room. If the camera cannot read the code, tap Enter the 6-digit code instead and type the six digits the TV shows.
A code that opens nothing says why: it belongs to another organization, it has expired, it is not a Muin screen code, or the screen was removed.
Pair a TV from your phone
- Turn on the TV. Muin Go on the TV shows a QR code and a six-digit code.
- In Screens, tap Scan and scan the TV’s code.
- Choose A new screen.
- Give it a name, or leave the TV’s model as the name.
- Pick its Board. A TV shows a display board: signage, a donor wall or a live appeal. If you have none yet, make one on the web first.
- Pick a Location if you use them.
- Pick a Lock level. Maximum is recommended for a TV: it stays on the board until staff enter the PIN.
- Set the Exit PIN, 4 to 8 digits. You can reuse the PIN of another screen.
- Tap Pair this TV.
The phone shows Waiting for the TV, then is paired once the TV checks in. Keep the TV on until then.
Replace a screen that lost its pairing
A TV can lose its pairing, for example after its app data is cleared. It then shows the Add this screen QR again, and your list still has the old screen.
- Scan the TV’s code from Scan.
- Choose Replace an existing screen and pick the old screen.
- Check what moves over: its name, board and location, plus its lock, exit PIN, alerts and history.
- Tap Pair and replace.
The old screen is removed from your list when the TV pairs.
Set up a tablet from your phone
- In Screens, tap Set up a tablet.
- Pick the board the tablet shows and tap Show setup code.
- On the tablet, open Muin Go and tap Scan QR code, then scan the code on your phone. You can type the code on the tablet instead.
The code is good for a limited time, shown under it. When it expires, tap Make a new code.
A screen’s page
Tap a screen in the list, scan its manage QR or its label, or tap one of its alerts. The page shows:
- Status: online or offline, when it was last seen, its board, version and location, and why it needs attention.
- Screenshot: the latest picture of what is on the screen, and Take a new one.
- Board: what the screen should be showing.
- Why it is offline: last check-in, network, version, last error and what to try next.
- Logs: collect the screen’s logs and send them to support.
- Label: the screen’s QR label to share or print.
- Exit PIN and recovery code: owners only.
- Activity: what happened to the screen and when.
Actions
| Action | What it does |
|---|---|
| Identify | Shows the screen’s name and location full-screen on the TV or tablet for 10 seconds |
| Restart | Restarts Muin Go on the screen |
| Sync | Pulls the latest configuration now |
| Board | Switches the board the screen shows |
| Mode | Switches the screen’s mode |
| Wake or Sleep | Turns the display on or off |
| Turn off kiosk | Leaves kiosk mode while the screen stays paired |
| Update app | Asks the screen to take its app update |
| Install app build | Installs the current app build on an Android screen |
| Lock or Unlock | Locks the screen or releases it for maintenance |
| Factory reset | Erases the device. You type the screen’s name to confirm |
Some actions only show where the screen can run them. Factory reset, for example, is for managed Android screens only.
Each action shows its real result. A screen that is offline gets the action when it next checks in, and the page says it is queued, not done.
Identify a screen
When two boxes look the same, open one of them and tap Identify. The TV or tablet shows its name and location in large text for 10 seconds. The web device page has the same Identify button.
Print a label for a screen
Open the screen’s page and use the Label card to share the label as a PDF. Send it to a printer or save it. The label has the screen’s name, location and a QR code. Stick it on the back of the TV. Scanning it opens that screen’s page, even when the TV is off.
On the web, Print label on the device page prints a 2 x 1 inch label.
Phone alerts for screens
Owners and admins get a push on their phone when a screen:
- goes offline, and when it comes back
- loses its pairing
- fails an app update
Tap the push to open that screen’s page. The push is on by default. To turn it off for yourself, open Settings > Notifications and switch off push for Device alerts.
When it goes wrong
| What you see | What to do |
|---|---|
| Ask an owner or admin | Screens is for owners and admins. Ask one to change your role or to do this for you. |
| This code has expired | The TV shows a new code by itself. Scan that one. |
| This screen belongs to another organization | Switch to the right organization in Settings, then scan again. |
| No TV is showing that code | Check the six digits on the TV and scan again. |
| That TV is already paired | If it is not in your list, restart Muin Go on the TV for a new code. |
| No display board yet | Make a signage, donor wall or live appeal board on the web, then pair the TV. |
| An action says it is queued | The screen is offline. It runs the action when it next checks in. |
Next step
- What a screen shows: Digital Signage
- Pairing, health and commands on the web: Device Management
- Muin Go on your phone: Muin Go mobile app overview